CNC 95.00

Technical Details

CNC 95.00

Motion Controller MC95

  • CPU: Intel® Quad-Core™
  • SDRAM: 4 GB DDR3
  • 4 GB
  • Read-write memory: 128 KB MRAM (parameter memory)
  • 2 x USB host
  • 2 x COM interfaces
  • Acceleration sensor
  • Temperature sensor
  • Interface to PC: Ethernet
  • 2 x digital bus via optical fiber connector (120 MBit) to the drives MD95, FC95 and to the I/O system 84.06
  • 1 x digital bus via optical fiber connector (12 MBit) to the I/O system 84.06
  • SD card (option)
  • SSD hard disk (option)

Servo amplifier MD95 Nano with central voltage supply PS95

  • Mains voltage 3 x 230 VAC to 250 VAC
  • Rated current IN: 2 Arms to 32 Arms              
  • Peak current IS: 14 Arms to 57 Arms
  • 1-axis, 2-axis, 4-axis and 6-axis design for rotary and linear AC motors
  • Evaluation of incremental encoder, absolute encoder or linear measuring system
  • Digital bus via optical fiber cable (120 MBit) for connection to MC95

 

Frequency converter FC95 with central voltage supply by PS95

Asynchronous spindles:

  • Rated power: 6 kVA to 15 kVA
  • Mains input voltage: 3 x 230/250 VAC, 50/60 Hz
  • Rated current IN: 21 Arms to 35 Arms
  • Peak current IS: 42 Arms to 71 Arms
  • Output frequency f: 5.834 Hz
  • Evaluation of speed sensors or operation without sensors
  • Digital bus via optical fiber cable (120 MBit) for connection to MC95

Synchronous spindles:

  • Rated power: 2 x 1.2 kVA
  • Mains input voltage: 3 x 230/250 VAC, 50/60 Hz
  • Rated current IN: from 3.5 to 8 Arms
  • Peak current IS: 14 Arms
  • Evaluation of Hall sensors
  • Digital bus via optical fiber cable (120MBit) for connection to MC95

 

Decentral I/O-System 84.06

  • DC supply: +24 V
  • Inputs and outputs: 768
  • Inputs: +24 V (active-high)
  • Outputs: +24 V, 350 mA / short-circuit proof
  • Data transmission via optical fiber cable (12 MBit) / CRC monitored
  • Serial interface for external PLC
  • PD-Box with integrated interface for tool measurement and tool test