Sktip to content

 ATOMIZER 

THE OPTIMAL PRODUCTS FOR YOUR ATOMIZER APPLICATION

Rotary atomization processes, e.g. applied for the production of milk powder or flue gas treatment, require high circumferential speeds. Therefore, it is necessary to use matching high-speed motors instead of low-speed standard motors.

Due to the necessary high rotating field frequency and the small rotor volume, standard frequency converters are not able to drive these motors adequately, or only with the help of expensive additional components such as sine-wave filters.

SIEB & MEYER frequency converters are optimized for high speed motors, as they provide the necessary rotating field frequencies. Furthermore, special control and drive technologies ensure a low heating of the motor without the need to use sine-wave filters. The low heating of the motors through special control and drive technologies without the use of sinusoidal filters is ensured. The motor heating has a significant impact on the system's efficiency and the service life of motors and bearings. 

PRODUCT OVERVIEW

 

Device series Power range Input voltage Technology Speed (frequency) Type Communication Safety functions
SD2S 0.3 .. 55 kVA 115 .. 480 VAC 2 Level PWM 120,000 1/min
(2,000 Hz)
Single-axis device RS232, CAN Bus, EtherCAT, via Gateway: Profibus, Profinet STO
SD2M Turbo 80 .. 432 kVA 230 .. 480 VAC 3 Level PWM 120,000 1/min
(2,000 Hz)
Single-axis device RS232/485, Modbus RTU, CAN Bus, EtherCAT, via Gateway: Profibus, Profinet STO
SD4M 80 .. 470 kVA 230 .. 480 VAC 3 Level PWM 240,000 1/min (4,000 Hz) Single-axis without ballast circuit CANopen, Ethernet, EtherCAT STO

PRODUCTS PRECISELY TAILORED FOR YOUR APPLICATION

With our experience from customized drive systems that are meanwhile produced in large series and as well as our standard devices, we are supporting you from the project planning phase to the series production.