Sktip to content

Printed Circuit Board Routing

The optimal products for your PCB routing machine

PCB routing is determined by the continuously increasing technical and commercial requirements of the electronics industry. The steadily rising level of integration of the electronic components requires increasingly complex and more precise contours for PCBs.

At the same time, the prevailing pricing pressure on electronic devices demands a continuous step-up in productivity and a simultaneous improvement in the process reliability. The CNC controls by SIEB & MEYER contribute to meet these challenges with your machine not only today, but also in the future.
 

Selection Chart for Routing Machines

Product Overview

 

A. CNC Control Systems

Device series     Description Drive package
CNC 93.00 THE NEW GENERATION: Complete hardware and software solution for the operation of a PCB milling machine Servo amplifier and frequency converter for the operation of all motion axes/milling spindles included
CNC 82.00 Complete hardware and software solution for the operation of a PCB milling machine Servo amplifier and frequency converter for the operation of all motion axes/milling spindles included


B. Frequency Converters

Device series Power range Input voltage Technology Speed (frequency) Version Communication Safety functions
SD2S 0.3 .. 55 kVA 115 .. 480 VAC 2 Level PWM 120,0001/min (2,000 Hz) Single-axis device for the operation of synchronous and asynchronous spindles RS232, CAN Bus, EtherCAT via Gateway, Profibus, Profinet STO
SD4S 0.8 .. 66 kVA 115 .. 480 VAC 2 Level PWM 240,000 rpm (4,000 Hz) Single-axis device for the operation of synchronous and asynchronous spindles CANopen, EtherCAT, (Profinet, Powerlink) STO
FC2 13 kVA 230 .. 480 VAC Regulated DC link (PAM) 500.000 rpm (8.333 Hz) Multispindel device RS232/485, CAN Bus, EtherCAT STO
  • CNC 82.00

    CNC Controller for Routing Machines

    The powerful software and hardware of this top CNC allows the highest accuracy, productivity and availability of your routing machine in the production.

  • CNC 93.00

    Our Top-Modern CNC Controller!

    CNC 93.00 sets new standards in control technique for PCB routing machines. Equipped with the latest processor technologies and programming tools as well as future-proof interfaces for data retrieval this CNC leaves nothing to desire.

     

  • Frequency Converter SD4S

    Ready for the Future

    Complex tasks are quickly processed with the frequency converter SD4S. The devices are designed for stationary use in control cabinets of machine tools, turbo compressors and turbo blowers.

Selection Chart for Routing Machines

You are not sure which CNC control suits your routing machine?
Here you will find answers to your questions!

Features CNC 93.00 CNC 84.00 CNC 82.00
Maximum number of axes X/Y/Z  6 / 6 / 8 6 / 6 / 8 1 / 1 / 6
Maximum number of spindles 8 8 8
Maximum axis speed 100m/min 100m/min 100m/min
Maximum acceleration 50m/s²/ 100m/s²/ 20m/s²/
Central drive for Z-axes Yes Yes Yes
Gantry drive Yes Yes No
Auxiliary axes Yes Yes No
Independent work stations /
IWS
Yes Yes No
Depth function with different
methods of surface detection
Yes Yes Yes
Surface detection QUIK /
mapping / spotfacing
Yes Yes Only mapping / spotfacing
Position corrections via camera Yes Yes Yes
Laser tool measurement Yes Yes No
Tool monitoring
by means of BBD / CBD
Yes / Yes Yes / Yes Yes / Yes
Pin hole management Yes Yes Yes
Number of tool magazines 1000 500 500

Pin Manager: 
+ optimization and drilling of pin holes
+ Measurement and management of pins

Yes No No

Auto pinning:
+ insert and remove pins automatically

Yes No No
Standard data interface
OPC UA
Yes No No
OPC UA by SM IIoT Connect
(Software version 21.01 required)
No Yes Yes
SMDDE No Yes Yes

SLM - Smart Layer Management:
High-end depth routing

Yes Yes No

Features depending on the selected software package
 

Subject to change without notice

 

Click here for selection chart for drilling machines.

Do have questions or do you need a quotation?
Don´t hesitate to contact us.

Products precisely tailored for your application

With our experience from customized drive systems that are meanwhile produced in large series and as well as our standard devices, we are supporting you from the project planning phase to the series production.