Sktip to content

Printed Cicuit Board Drilling

The optimal products for your PCB drilling machine

PCB drilling of printed circuit boards is determined by continuously increasing technical requirements of the electronics industry, as well as the requirements for cost optimization. The steadily rising level of integration of the electronic components requires to improve drilling accuracy and process reliability.

At the same time, the prevailing pricing pressure on electronic devices demands a continuous step-up in productivity. The CNC controls by SIEB & MEYER contribute to meet these challenges with your machine not only today, but also in the future.
 

Selection chart for drilling machines

Product Overview

A. CNC Control Systems

Device series Description Drive package
CNC 84.00 Complete hardware and software solution for the operation of a PCB drilling machine Servo amplifier and frequency converter for the operation of all motion axes/drilling spindles included
CNC 95.00 THE NEW GENERATION: Complete hardware and software solution for the operation of a PCB drilling machine Servo amplifier and frequency converter for the operation of all motion axes/drilling spindles included


B. Frequency Converters

Device series Power range Input voltage Technology Speed (frequency) Version Communication Safety functions
SD2S-FPAM 1.5 .. 3.8 kVA 115 .. 230 VAC Controlled DC link (PAM, FPAM) 480,000 rpm (8,000 Hz) Single-axis device for the operation of synchronous and asynchronous spindles RS232, CAN Bus, EtherCAT STO
FC2 13 kVA 230 .. 480 VAC Regulated DC link (PAM) 500.000 rpm (8.333 Hz) Multispindel device RS232/485, CAN Bus, EtherCAT STO
  • CNC 84.00

    CNC Control With Top Technology

    The powerful software and hardware of the CNC 84.00 allows the highest accuracy, productivity and availability of your drilling machine in the production.

  • CNC 95.00

    CNC Steuerung-CNC 95.00

    Make It Your Way - With Our Top-Modern CNC Control!

    CNC 95.00 sets new standards in control technique for PCB drilling machines. Equipped with the latest processor technologies and programming tools as well as future-proof interfaces for data retrieval this CNC leaves nothing to desire.

     

Selection Guide for Drilling Machines

You are not sure which CNC control suits your drilling machine?
Here you will find answers to your questions!

Features CNC 95.00 CNC 84.00 CNC 84.00-2Z CNC 82.00-4Z CNC 82.00-2Z
Maximum number of axes X/Y/Z  6 / 6 / 8 6 / 6 / 8 1 / 1 / 2 1 / 1 / 4 1 / 1 / 2
Maximum number of spindles 8 8 2 4 2
Two different spindles
per station (i.e. drilling/routing)
Yes Yes Yes No No
Maximum axis speed 100m/min 100m/min 100m/min 100m/min 100m/min
Maximum acceleration 100m/s² 100m/s² 100m/s² 50m/s² 50m/s²
Gantry drive Yes Yes No No No
CNC auxiliary axes Yes Yes No No No
Independent work stations /
IWS
Yes Yes No No No
Depth function with different
methods of surface detection
Yes Yes Yes Only with contact Only with contact
Surface detection QUIK /
mapping / spotfacing
Yes Yes Yes Only QUIK Only QUIK
Position corrections via camera Yes Yes Yes Yes Yes
Laser tool measurement Yes Yes Yes Yes Yes
Tool monitoring
by means of BBD / CBD
Yes / Yes Yes / Yes Yes / Yes Yes / Yes Yes / Yes
Number of tool magazines 1000 500 500 500 500
Standard data interface
OPC UA
Yes No No No No
OPC UA by SM IIoT Connect
(Software version 21.01 required)
No Yes Yes Yes Yes

SLM - Smart Layer Management:
High-end depth routing and

depth drilling functions

Yes Yes Yes No No

 

Features depending on the selected software package
 

Subject to change without notice

 

Click here for selection chart for routing machines.

Do have questions or do you need a quotation?
Don´t hesitate to contact us.

Products precisely tailored for your application

With our experience from customized drive systems that are meanwhile produced in large series and as well as our standard devices, we are supporting you from the project planning phase to the series production.