SD2T

The All-in-one Solution for High-speed Applications

The Interfaces of SD2T

LCD Status display
LED Status display
Operating buttons
Motor connection (Two optional connectors are available for the 600 VA and 3.5 kVA version)
9 digital inputs
4 digital outputs
1 digital encoder output
2 analog ± 10 V inputs
1 analog + 10 V output
USB connector
Mains connector (On/off switch on the front panel of the 600 kVA and 3.5 kVA version)

Software for Initial Operation and Parameterization:
drivemaster2

The oscilloscope function allows optimization of the axes in the machine via the drive-setup-tool without additional measuring equipment.

The clear design of the software allows intuitive parameterization via graphics and block diagrams. The „Parameter-Wizard“ guides the user step-by-step through the system configuration and allows intuitive setup of the device via help messages and comments.

Technichal Specifications of SD2T

1-Phase Supply

115 – 230 V Mains supply (AC) / 60 V output voltage
300 VA	I_r: 8 A	I_p: 14 A	120 x 240 x 220 mm
600 VA	I_r: 14 A	I_p: 28 A	120 x 275 x 220 mm

115 – 230 V Mains supply (AC) / 220 V output voltage
3.5 kVA	I_r: 10 A	I_p: 28 A	120 x 275 x 220 mm

I_r = rated current, Ip = peak current (1s).
Stated currents are rms values.
Voltage limits: -10% / +10%
The device dimensions are defined as height x width x depth, related to the mounting dimensions.

Brochure Download

SD2T_e_Rev04_web.pdf (1.2 MB)

Errors and omissions excepted.