Related Products

SD2S
The drive amplifier SD2S includes a broad variety of functionalities. SD2S was c …more
SD2T
Due to an integrated multi voltage power supply unit with power factor correctio …more

Technical Papers

Maximum Performance
A Special Type of Control

SD2S

The Specialist for High-speed Applications

The Interfaces of SD2S

SD2S Antrieb Schnittstellen
  1. Safety Intergrated: Restart lock to achieve category 4 according to EN 13849-1:2008-12, EN 62061:2008-04 and
    EN 61508:2002-11; Safety level SIL 3
  2. USB connector: Parameterization, diagnosis and operation
  3. RS232 / CAN interface
  4. 2 Analog reference value interfaces: +/-10 V; 2 analoge outputs: 0-10 V
  5. Universal motor encoder interface:
    Hall sensor, linear Hall sensor, magnetoresistive sensor, namur sensor (pulse generator), SinCos encoder
  6. 9 digital inputs and 5 digital outputs
  7. Optical fiber Profibus adapter, connection via SERVOLINK 4
  8. Mains supply
  9. Motor cponnection

Operation Unit (optional)

Operation Unit (optional)

LCD status display for the indication of operating data:

  • Parameters
  • Reference / actual speed
  • Load display
  • Active spindle
  • Error messages

LED status displays for:

  • Ready for operation
  • Load message

Software for Initial Operation and Parameterization: drivemaster2

Software for Initial Operation and Parameterization: drivemaster2

The oscilloscope function allows optimization of the axes in the machine via the drive-setup-tool without additional measuring equipment.


The clear design of the software allows intuitive parameterization via graphics and block diagrams. The „Parameter-Wizard“ guides the user step-by-step through the system configuration and allows intuitive setup of the device via help messages and comments.


Technical Specifications of SD2S

1-phase Supply

50 V Mains supply (AC)
0.3 kVA Ir: 10 A Ip: 14 A 250 x 75 x 180 mm
0.7 kVA Ir: 20 A Ip: 28 A 250 x 110 x 180 mm
230 V Einspeisung (AC)
1.4 kVA Ir: 10 A Ip: 14 A (28 A)* 250 x 75 x 180 mm
3.8 kVA Ir: 20 A Ip: 28 A (56 A)* 250 x 110 x 180 mm

3-phase Supply

50 V Mains supply (AC)
1.5 kVA Ir: 20 A Ip: 28 A 250 x 110 x 180 mm
230 V Mains supply (AC)
6.9 kVA Ir: 20 A Ip: 28 A (56 A)* 250 x 110 x 180 mm
480 V Mains supply (AC)
9.7 kVA Ir: 14 A Ip: 28 A (56 A)* 250 x 110 x 180 mm
15 kVA Ir: 23 A Ip: 29 A 390 x 180 x 180 mm
20 kVA Ir: 35 A Ip: 56 A 460 x 225 x 200 mm
30 kVA Ir: 44 A Ip: 70 A 460 x 225 x 200 mm
55 kVA ** Ir: 80 A Ip: 113 A 460 x 250 x 200 mm***

Ir = rated current, Ip = peak current.
Stated currents are rms values.
Voltage limits at 50 V: 50 V -10% up to 64 V +10%
Voltage limits at 230 V: 110 V -10% up to 230 V +10%
Voltage limits at 480 V: 230 V -10% up to 480 V +10%
The device dimensions are defined as height x width x depth, related to the mounting dimensions.
* Version with higher peak current.
** Water cooling also available.
*** Premliminary data.

DC-Mains Supply

680 V (DC) Mains supply - supply via external power supply
55 kVA Ir: 80 A Ip: 113 A 480 x 355 x 260 mm

Technical Specification Power Supply PS10

3 x 480 V Mains supply (AC)
48 kW 55 kVA 480 x 150 x 260 mm

Voltage limits at 480 V: 400 V -10% up to 480 V +10%
The device dimensions are defined as height x width x depth related to the mounting dimensions.

Brochure Download

SD2SHighSpeed e Rev06 web SD2SHighSpeed_e_Rev06_web.pdf (1.8 MB)
Errors and omissions excepted.